XAVAX 112267 LED Filament, E27, 470lm replaces 40W drop bulb, warm white

  • 2.950 OMR
    Unit price per 
Shipping calculated at checkout.

Only 31 left!

What's in the Box

- 1 LED filament

Technical Specs

Can be Dimmed No
Colour Temperature 2700
Cooling Element/Housing Glass
Design P45
Lamp Survival Factor at 6000h (min.) 0.9
LED Type Filament
Light color / color temperature Warm White - 2700 K
Nominal Service Life 15000 h
Number of LEDs 4
Number of Switching Cycles until Premature Failure (min.) 100000
Operating Position 360 °
Optimal Ambient Temperature 25 °C
Power Consumption of an Equivalent Incandescent Lamp 40 W
RA-Value 80
Socket E 27
Starting Time (max.) 0.5 s
Diameter 45 mm
Height 84 mm
Net Weight 23 gr
Energy Efficiency Class A++ (Scale from A++ to E, Optimum Value: A++)
Energy Savings Compared with an Equivalent Incandescent Bulb 90 %
Lamp Current 35 mA
Lamp Lumen Factor at End of Nominal Service Life (min.) 0.700
Rated Power Consumption 4 W
Rated Service Life 15000 h
Colour Consistency 2.5
EAR Reg.No. DE 38720470
Electrical Efficiency Factor of the Bulb (min.) 0.55
Lamp Lumen Maintenance Factor at 6000h 0.9
Mains Frequency 50 Hz
Nominal Beam Angle 330 °
Nominal Light Output 470 lm
Nominal Power Consumption 4 W
Operating Voltage 230 V
Premature Failure Rate 0 %
Rated Beam Angle 330 °
Rated Light Output 470 Im
Start-Up Time Until 95% of Full Light Output Has Been Reached (max.) 1 s
Weighted Energy Consumption 4 kWh/1000h
Colour Reproduction Index RA (min.) 80
LED Brand Epistar
Light Colour Warm White
Product Division Home & Living
Bulb Serves as Replacement for Standard Bulbs of This Size Drop
Suitable for Accent Lighting No - Beam Angle between 120° and 360° (Φuse)
Recommendations for Recycling Recycling Depot or Collection Point


Note for Consumers

The LED light should only be used in lights intended for its use. Before changing the light, allow it to cool down completely and switch off the power supply voltage. Damaged lights should be replaced immediately. No liability shall be assumed for damage caused by incorrect use.
The LED light is designed for operation in open luminaries. The heat generated by the light during operation may be emitted into the surrounding area. The service life prognosis is based on this mode of operation. LED lights can, of course, also be used in enclosed luminaries, however their service life will be reduced by insufficient cooling. Not dimmable!


We Also Recommend

Back to the top