XAVAX 112270 LED Filament, E14 replaces 40W candle bulb, warm white, dimmable

  • 3.700 OMR
    Unit price per 
Shipping calculated at checkout.

Only 10 left!

What's in the Box

- 1 LED filament

Technical Specs

Can be Dimmed Yes
Colour Temperature 2700
Cooling Element/Housing Glass
Design C 35
Lamp Survival Factor at 6000h (min.) 0.9
LED Type Filament
Light color / color temperature Warm White - 2700 K
Nominal Service Life 15000 h
Number of LEDs 4
Number of Switching Cycles until Premature Failure (min.) 100000
Operating Position 360 °
Optimal Ambient Temperature 25 °C
Power Consumption of an Equivalent Incandescent Lamp 40 W
RA-Value 80
Socket E 14
Starting Time (max.) 0.5 s
Diameter 35 mm
Height 118 mm
Net Weight 30 gr
Energy Efficiency Class A++ (Scale from A++ to E, Optimum Value: A++)
Energy Savings Compared with an Equivalent Incandescent Bulb 88 %
Lamp Current 24 mA
Lamp Lumen Factor at End of Nominal Service Life (min.) 0.700
Rated Power Consumption 4.5 W
Rated Service Life 15000 h
Colour Consistency 2.3
EAR Reg.No. DE 38720470
Electrical Efficiency Factor of the Bulb (min.) 0.824
Lamp Lumen Maintenance Factor at 6000h 0.9
Mains Frequency 50 Hz
Nominal Beam Angle 330 °
Nominal Light Output 470 lm
Nominal Power Consumption 4.5 W
Operating Voltage 230 V
Premature Failure Rate 0 %
Rated Beam Angle 330 °
Rated Light Output 470 Im
Start-Up Time Until 95% of Full Light Output Has Been Reached (max.) 1 s
Weighted Energy Consumption 5 kWh/1000h
Colour Reproduction Index RA (min.) 80
LED Brand Epistar
Light Colour Warm White
Product Division Home & Living
Bulb Serves as Replacement for Standard Bulbs of This Size Candle
Suitable for Accent Lighting No - Beam Angle between 120° and 360° (Φuse)
Recommendations for Recycling Recycling Depot or Collection Point


Note for Consumers

This LED bulb is designed for use in open fixtures. The heat produced during operation can thus be given off to the environment. The prognosticated service life refers to use in open fixtures. The bulb's service life is reduced if it is used in closed fixtures (insufficient cooling). Only use in appropriate fixtures. When replacing the bulb, it must be allowed to completely cool off and the mains voltage has to be switched off. Exchange damaged bulbs straightaway. No liability for improper use.
Among the huge number of different dimmers there may be some which impede the function of bulbs (flickering, noise).
Mixed operation, i.e. simultaneous use of LED bulbs and standard bulbs or different types of LED bulbs in one dimmer lead is not possible. Noise in dimmers that has not been noticed while using incandescent lamps: dimmer is not suitable for LED bulbs.
Corded dimmers (dimmer built in power cord) need a separate on/off switch as they may not be able to regulate to 0.
Please observe the minimum load of the dimmer, otherwise it may not start or control falsely. Simple dimmers mostly function from 60W to 400W.
The fundamental brightness of built-in dimmers must be set at a high enough level, otherwise the LED bulb may not be switched on.
Change the dimmer setting slowly and not suddenly or too fast.
Only use dimmers for incandescent lamps, no dimmers for transformers, etc.
Touch dimmers are mostly not suitable. A wrong dimmer can cause permanent damage to the bulb.


We Also Recommend

Back to the top